China Double Gearbox Double Output Shaft Reducer 24V 36mm 3650 Planetary BLDC Gear Motor with External Drive bicycle planetary gearbox

Warranty: Other
Design Variety: CY-GMP36-3650
Use: Industrial Equipment
Variety: Equipment MOTOR
Torque: Stall torque 70kg.cm
Construction: Long lasting Magnet
Commutation: Brushless
Safeguard Characteristic: Completely Enclosed
Velocity(RPM): No load 84±12rpm
Constant Recent(A): No load .22A( .35 Max )
Efficiency: IE 1
Solution Identify: GMP-36-TEC3650 Brushless DC Planetary Gear Motor
Rated Voltage: 24V
Motor Diameter: 36mm
Motor type: BLDC Equipment Motor
MOQ: 500PCS
Excess weight: 606.3g
Gearbox Variety: Planetary Gearbox
Attribute: High Effectiveness
OEM&ODM Provider: Accessible
Certification: ce, RoHs, CCC
Packaging Information: Offering unit: Single itemPackage dimension: 420mm*320mm*280mmQuantity: one hundred pieces/Carton
Port: HangZhou, HangZhou

Double Gearbox Double Output Shaft Reducer 24V 36mm 3650 Planetary BLDC Equipment Motor with External Travel

  • Working Situations:
  • 1.Rated voltage:24V
    2.Environmental temperature:-30~+40℃
  • ELECRICAL Qualities:(After thirty documents operating)
  • Equipment Ratio 1:72.1
    No Load Pace 84±12rpm
    No Load Current .22A( .35A Max )
    Stall Torque >70kg.cm
    Stall Current <5A
  • Appearance Dimension:

  • SPECIFICATION OF Generate:
    Part1

    Portion 2
    1.Kind: Brushless motor controller
    two.Selection of voltage: DC10V~30V
    3.Rated electricity: ≤50W
    four.Overcurrent safety: 5.5A(setted by external resistance)
    5.Overvoltage protection: 32V(setted by exterior resistance)
    6.Controller size: 35mm Size*58mm Width
    seven.Doing work temperature: -10℃~70℃
    8.Storage temperature: -30~125℃

    Component 3
    Wires Illustration
    * Connection of motor: Motor wires and corridor singnal line need to related as earlier mentioned as picture.
    Singnal lines of XH2.5-6P socket:
    (1)Good pole input(DC10V-35V) – Pink wire.
    (2)Adverse pole – Black wire.
    (3)FG Singal output(Detect motor speed by exterior units 6 quare wave pulse output per revolution )- Yellow wire.
    (4)CW/CCW(With out relationship CCW, 36mm 12v DC Planetary Equipment Motor With Encoder 555 DC Gearbox Reducer Motor With connection & VIL≤0.6V CW) – White wire.
    (5)Velocity Management: Pwm contol VIL≤0.6V,run VIH(5V≥V≥2V)end – Blue wire.
    (6)Brake control: VIL≤ China Factory Substantial Torque Speed Reducer Planetary Motor Gear Reductor Gearbox .6V, motor brake – Green wire. No increased than 5V voltage input into pin 3,4,5,6 of XH2.5-6P
    socket, or will get injury.

    Discover:
    1.Postive and negative need to be linked strictly according to specification or will lead to drive burn up.
    two.Travel managed by Corridor brushless motor. Corridor HU, HV, HW and motor 3 section MU, MV, AGV double steering wheel drive massive torque minimal speed driving wheel smart CZPT vehicle logistics warehouse CZPT should corresponding
    to each and every port of drive, or will not start off.
    three. All parameters must not overload use, in any other case it will lead to devastating injury to the drive.
    Application
    Firm Data
    FAQQ: Are you trading business or maker ?
    A: We are producer.

    Q: Could you head sending the quotation for this motor?
    A: All of our motors are personalized primarily based on your distinct requirements. We will supply the quotation
    before long right after you ship your specific demands and annual quantity.

    Q: What is actually the lead time for samples or mass production?
    A: Produce time is dependent on the quantity and tailored motor kind. Usually it takes 5-10 functioning times if
    the resources are in stock, and it requires 15-25 working days if the resources are not in stock.

    Q: Do you supply some varieties of components like PCB, connector, wires for the motor or related home appliances?
    A: We focus in motor production, rather of equipment or home appliances. While if your need to have these
    merchandise, we can propose and offer to you, forty two mm gearbox 775 DC Motor brushed BLDC 24v 18v lower speed 200 rpm substantial torque Planetary Equipment Motor preserving much more your time, as we are expert in motor sector.

    Q: Are your motors certificated with RoHs?
    A: Sure. All of our motors are RoHs compliant, and below strict ISO 9001 administration.

    The Basics of a Planetary Gearbox

    The basic model of a planetary gearbox is a highly efficient transmission that transmits nearly ninety percent of the power it receives. The basic planetary gearbox comes in three basic types: Inline, Helical, and Spur. Below, we will discuss the differences between each of them and which one is better for your needs. A planetary gearbox is an important part of any engine and may be the perfect choice for your vehicle.
    planetarygearbox

    Inline planetary gearbox

    An inline planetary gearbox has an inline arrangement of gears that enables the transfer of power. Its design makes it stable and reliable, and the space and weight-saving benefits make it a popular choice for many applications. Planetary gearboxes have low inertia, high torque, and a wide range of reduction ratios, which make them a versatile choice for many industries. To find out more about this type of gearbox, read about its construction and specifications.
    A planetary gearbox is composed of two parts: a sun gear (also called the central or input gear), and two planet gears (also called outer gears). These gears are connected to each other via a carrier. In order to get the best performance from your gearbox, it’s important to find a model with the features and benefits required for your application. Also, be sure to check out the delivery time, global availability, and customer service of your selected constructor. A few constructors are faster than others and have the ability to respond quickly, while others can deliver every single planetary gearbox out of stock.
    Whether you’re using an inline planetary gearbox for your car’s transmission, or you’re building a new machine, it’s important to choose the right size for your application. The most common ratio is five:1, but an inline gearbox can be as high as 1000:1! The torque range is between 250-950 lb-in for continuous torque, and up to 5800 lb-in for yield torque. Some companies even offer custom shafts if you need them to fit a specific application.
    Inline planetary gearboxes have a high ratio of helical rotation and are useful for applications where space is limited. Their low-backlash design allows them to handle high torques and high accelerations without backlash. Despite their compact size, planetary gear systems also have high single-stage reduction ratios, a feature that makes them ideal for a variety of industrial applications. They can also be connected for high reduction ratios.
    An inline planetary gearbox can be used in many applications, from small tools to heavy industrial machinery. Its basic design includes three components: an input gear pair, an output gear pair, and a stationary position. Some planetary gearbox designs also include additional gear sets that can provide a slight offset between input and output. A planetary gearbox may also contain multiple bearings, which make the assembly more robust and reliable.
    Inline planetary gear reducers are commonly used in industrial settings to slow down an electric motor. They are able to multiply torque, which means they can reduce the input speed to a level where the mechanical devices inside the motor can function properly. This type of gear reducer also has a low clearance, which makes it ideal for machines with high torque. However, you should consider the amount of torque required in your application before you make a purchase.
    planetarygearbox

    Helical planetary gearbox

    A helical planetary gearbox is a type of mechanical system. The gears are connected by joints to the carrier that holds the planets stationary. The sun gear serves as an input to the other gears, and the planet gears rotate at a rate that depends on the number of teeth in each gear. The ratio between these gears is -Ns/Np, and the number of teeth in the ring is N r, N s, and N p.
    Another type of planetary gearbox uses multiple helical axes to distribute the load. This design also offers high stiffness and low backlash, which is important for applications involving frequent start-stop cycles and rotational direction changes. It also features a compact design and low mass inertia. A helical planetary gearbox can be used for a wide range of applications. Listed below are some of the benefits of helical gear technology.
    The basic design of a helical planetary gear is based on the principle of stepping planets. This concept eliminates the need for timing marks and restrictive assembly conditions. The planetary gear’s helical shape can be modified to achieve a greater transmission ratio in an equal or smaller volume. For example, a 50-T ring gear will yield the same effect as a 100-T ring gear.
    In addition to the helical axis, a helical planetary gearbox also has a wide variety of secondary features that are critical to torque transmission. For instance, compact needle roller bearings are appropriate for a helical planetary gearbox because of their low-profile design and small space. However, a tapered roller bearing is better suited to handling high axial forces. In general, a helical planetary gearbox will have a higher efficiency rate and lower noise levels.
    A helical planetary gearbox will have a number of components that can vary in size and shape. They will include a sun gear and many planetary parts. The central sun gear will take a low-torque input and will run multiple external gears to increase the torque and speed. This basic model of a planetary gearbox is highly efficient, transferring 97% of the power input. There are three main types of planetary gearboxes: the cylindrical planetary gearbox, the helical planetary gearbox, and the helical wormwheel.
    The CZPT is a good example of an entry-level helical planetary gearbox. It is extremely reliable and aimed at providing torque in quiet applications with high precision. The Access series is another option, which is designed to meet the needs of the low-backlash planetary gearbox market. It features helical planetary gears with five to eight arc-minutes backlash, and is built on a monobloc housing.
    A helical planetary gearbox is widely used in 3D printing. They are lightweight and can provide a high gear ratio. In addition to their low weight and high efficiency, some people have installed them into 3D printers to improve the accuracy of their designs. And in addition to 3D printing, helical gears are used in many industrial applications. If you’re thinking about purchasing one, you should know what the benefits are.
    planetarygearbox

    Spur planetary gearbox

    There are many advantages to a spur planetary gearbox, from its compact design and low cost to its unmatched power transmission capacity per unit volume. Planetary gears have high efficiency per stage and can achieve up to 95% efficiency, depending on the ratio. Planet gears are mounted on a joint carrier, and the output rotation speed is slower than the drive rotation speed, which leads to increased torque. The higher the gear wheels, the more torque the unit can produce.
    A spur planetary gearbox incorporates multiple other gear sets that must have helical teeth. These other gear sets must be helical, and the motor must be aligned with the driven parts. The spur gears are the most efficient type of planetary gear, as their teeth are symmetrical, which means no axial forces are generated. The difference between a spur and a planetary gearbox is its shape.
    The right angle spur planetary gearbox is a versatile design with a spiral bevel gear that provides superior smoothness and quiet operation. This gearhead is case-hardened and ground to increase its efficiency. These gears can be purchased in 3-100 ratios. Spur planetary gearboxes can also have ISO rotary flanges, keyed shafts, DIN splines, or hollow compression connections.
    A spur planetary gearbox utilizes spur gears around the circumference of the mechanism. The spur gears rotate between gears that have internal and external teeth. Because of this, the angular velocity of the spur gear differential carrier is the average of the ring gears and sun gears. A spur gearbox can also be considered a compound planetary gear. It is typically used for servo applications. Unlike spur gears, helical planetary gears are easier to maintain and have lower noise levels.
    The most notable difference between a spur planetary gearbox and a planetary gearhead is the lubrication of the pinion and the spur gear head. A spur gear head is less complex, but cannot handle the same amount of load as a planetary gearhead. Both types can achieve the same backlash, but a planetary gearhead has better lubrication retention than a spur gear. It can run at higher speeds without excessive lubrication, while a spur gear drive is more efficient at low speeds. The reduction ratio of a planetary gearhead is near unity while that of a planetary gear head is many thousand to one.
    A planetary gearbox has many applications. Plastic machinery, goods & personnel lifts, and machine tools are all prime examples of these types of gearing systems. Other industries that use these gears include wind turbines and sugar crystallizers, as well as steel and sugar mills. And of course, the use of planetary gears is not limited to these industries. It is used in many different ways, including slewing drives, mill drive, and derrick & dockyard cranes

    China Double Gearbox Double Output Shaft Reducer 24V 36mm 3650 Planetary BLDC Gear Motor with External Drive     bicycle planetary gearboxChina Double Gearbox Double Output Shaft Reducer 24V 36mm 3650 Planetary BLDC Gear Motor with External Drive     bicycle planetary gearbox
    editor by czh 2023-02-14

    Tags: 24v gear motor | 24v motor | 36mm gear motor | 36mm planetary gearbox | bicycle drive shaft | bicycle gear | bicycle gearbox | bicycle shaft drive | bicycle with gear | bldc gear | bldc gear motor | bldc gearbox | bldc motor | bldc motor 24v | bldc motor gearbox | bldc motor planetary gearbox | bldc motor with gearbox | bldc planetary gear motor | china gearbox | china motor | double gear motor | double shaft | double shaft gear motor | double shaft motor | drive gear | drive motor shaft | external gear motor | gear | gear bicycle | gear bldc | gear drive | gear drive motor | gear gearbox | gear motor | gear motor drive | gear motor gearbox | gear motor reducer | gear motor shaft | gear reducer | gear reducer gearbox | gear reducer motor | gear reducer with motor | gear shaft | gear with motor | gearbox | gearbox bicycle | gearbox bldc | gearbox bldc motor | gearbox china | gearbox gear | gearbox motor | gearbox motor 24v | gearbox planetary | gearbox reducer | gearbox shaft | gearbox with | motor | motor 24v | motor bicycle | motor bldc | motor drive | motor gear shaft | motor gearbox | motor gearbox china | motor motor | motor planetary gearbox | motor reducer | motor reducer gearbox | motor shaft | motor shaft gear | output shaft | output shaft gearbox | planetary drive | planetary gear | planetary gear drive | planetary gear motor | planetary gear motor 24v | planetary gear reducer | planetary gearbox | planetary motor | planetary reducer | planetary reducer gearbox | planetary reducer motor | reducer | reducer gear motor | reducer gearbox | reducer motor | reducer shaft | shaft | shaft bicycle | shaft drive | shaft drive bicycle | shaft gear | shaft motor | shaft output